Do not mix too much material at once to avoid untimely construction

After the waterproofing layer has dried, we should apply a layer of protective mortar (cement + sand) on the surface of the waterproofing layer.

To help the junction be closed, you should use a burner to melt the edge of the array.

You need to reinforce weak positions such as: wall corners, expansion joints, and pipe necks.

During application, if bubbles appear causing the membrane to blister, you need to puncture that area with a sharp object until the gas is completely released. Immediately after that, apply another sheet with an overlap margin of 50mm/

After construction is completed, creating a protective layer is extremely important. This protective layer will prevent tearing or damaging the screen.

Finally, you should apply the protective layer as soon as possible.

If you are interested and are learning about sika waterproofing underground water tanks, you can absolutely find more information through Non Nuoc Trading & Construction Company Limited.